Spartan Shineline Emulsifier Plus, Finish and Wax Stripper, Fresh Lightly Scent, 5 Gallons Pail, Pack of 1

Spartan Shineline Emulsifier Plus, Finish and Wax Stripper, Fresh Lightly Scent, 5 Gallons Pail, Pack of 1

Shineline Emulsifier Plus is a high performance stripper that quickly removes heavy build-ups and burnished floor finish. For use with ultra-high speed floor care systems, this formula can be used with hot or cold water. Shineline Emulsifier Plus is pleasant to use and is formulated with a light fragrance to eliminate strong solvent odors which can be particularly offensive.

Features

• Extra aggressive speed stripper
• Designed to quickly remove heavy build ups and burnished floor finish, enhancing time and labor savings
• Lightly scented to eliminate strong solvent odors

SPECIFICATIONS:

• Total Active Ingredients    :     40.25%
• Specific Gravity    :      1.017 @ 24°C/75°F
• Density     :      8.47 lbs./gal. @ 24°C/75°F
• Viscosity     :      water thin
• pH Concentrate     :      13.5-13.7
• Cloud Point     :      60°C/140°F
• Solvents     :     Butoxyethanol
• Flash Point     :      none

VERSATILE AND EASY TO USE:

Shineline Emulsifier Plus is versatile. May be used with hot or cool water. Mop on. Agitate. Remove remaining solution easily with a mop, wet vac or automatic scrubber.

DIRECTIONS FOR USE:

Some individuals may be sensitive to ingredients in this product. Before using, read product label and MSD sheet. Prevent pedestrian traffic with signs or barricades.

Light to Medium Finish/Wax Build-Up:

Dilute product 1:10 [12 oz./gal.] or [100 ml per liter) with warm or room temperature water.

Heavy Finish/Wax Build-Up:

Dilute as strong as 1:2 [64 oz./gal.] or [500 ml per liter]. Liberally apply product with mop tosmall section (100 sq. ft./9 m2) of floor. Be sure to completely cover floor to the baseboards. After 3 to 5 minutes, agitate the wetted section with mop or machine scrub. Pick up solution using mop or wet vac.

Note: Do not allow solution to dry on the floor. Damp mop 2 or 3 times with clear water to remove residue or squeegee tracks as necessary. Flood rinsing is not required before recoating.

Be sure to read all Directions, Precautionary and First Aid Statements on product labels before use of this or any Spartan product. If questions remain, consult your employer or a physician. Material Safety Data Sheets for all Spartan products are available from your authorized Spartan distributor or by visiting www.spartanchemical.com.