-
Description
Renown 20” Low Speed Floor Machine with Pad Driver, Metal, Blue, 1.5 HP, 175 RPM
The Renown 20 in. floor machines is a rugged high powered machines built for years of use in a wide range of floor machine applications. With easy-to-use fingertip controls and multiple safety features, such as handle-mounted safety switch and a 50 ft. yellow cord. These all metal construction machines are designed for Heavy-Duty use.
HIGHLIGHTS
- All Metal Construction
- 20" Deck
- 19" Pad Driver
- Triple Planetary All Steel Gear Box
- Universal Clutch Plate
- Safety Lock-Out Switch
- 50' Cord
- 66-Frame Motor
SAFETY PRECAUTIONS
1. Do not operate machine:
– Unless trained and authorized.
– Unless you have read and understand the operators manual.
– In flammable or explosive areas.
– With a damaged cord or plug.
– If not in proper operating condition.
– In outdoor areas.
– In standing water.
– With the use of extension cords.2. Before operating machine:
– Make sure all safety devices are in place and operating properly.3. When using machine:
– Do not run machine over cord.
– Do not pull machine by cord or plug.
– Do not pull cord around sharp edges or corners.
– Do not unplug by pulling on the cord.
– Do not stretch cord.
– Do not handle plug with wet hands.
– Keep cord away from heated surfaces.
– Report machine damage or faulty operation immediately4. Before leaving or servicing machine:
– Turn off machine.
– Unplug cord from outlet.5. When servicing machine:
– Unplug cord from outlet.
– Use manufacturer supplied or approved replacement parts.Storage:
1. Unplug machine from power source and wrap cord on handle.
2. Tilt machine back and remove pad driver or brush.
3. Store machine in upright position and in a dry area. -
PRODUCT REVIEWS
Write Review
This product hasn't received any reviews yet. Be the first to review this product!
- FIND SIMILAR PRODUCTS BY CATEGORY
Renown 20” Low Speed Floor Machine with Pad Driver, Metal, Blue, 1.5 HP, 175 RPM
The Renown 20 in. floor machines is a rugged high powered machines built for years of use in a wide range of floor machine applications. With easy-to-use fingertip controls and multiple safety features, such as handle-mounted safety switch and a 50 ft. yellow cord. These all metal construction machines are designed for Heavy-Duty use.
HIGHLIGHTS
- All Metal Construction
- 20" Deck
- 19" Pad Driver
- Triple Planetary All Steel Gear Box
- Universal Clutch Plate
- Safety Lock-Out Switch
- 50' Cord
- 66-Frame Motor
SAFETY PRECAUTIONS
1. Do not operate machine:
– Unless trained and authorized.
– Unless you have read and understand the operators manual.
– In flammable or explosive areas.
– With a damaged cord or plug.
– If not in proper operating condition.
– In outdoor areas.
– In standing water.
– With the use of extension cords.
2. Before operating machine:
– Make sure all safety devices are in place and operating properly.
3. When using machine:
– Do not run machine over cord.
– Do not pull machine by cord or plug.
– Do not pull cord around sharp edges or corners.
– Do not unplug by pulling on the cord.
– Do not stretch cord.
– Do not handle plug with wet hands.
– Keep cord away from heated surfaces.
– Report machine damage or faulty operation immediately
4. Before leaving or servicing machine:
– Turn off machine.
– Unplug cord from outlet.
5. When servicing machine:
– Unplug cord from outlet.
– Use manufacturer supplied or approved replacement parts.
Storage:
1. Unplug machine from power source and wrap cord on handle.
2. Tilt machine back and remove pad driver or brush.
3. Store machine in upright position and in a dry area.
This product hasn't received any reviews yet. Be the first to review this product!